Ultrasonic flowmeter
Portable ultrasonic flowmeter
Handheld ultrasonic flowmeter
Fixed ultrasonic flowmeter
Industrial ultrasonic water meter
Ultrasonic calorimeter (table)
Doppler ultrasonic flowmeter
Electromagnetic flowmeter
Turbine flowmeter
Vortex flowmeter
Ultrasonic liquid level (difference) meter
Radar fluid (level) level meter
Guided wave radar level gauge
Intelligent radar level gauge
Mine flowmeter
Multi-channel ultrasonic flowmeter
Stainless steel electromagnetic flowmeter
Pressure transmitter
You are here: Home> Products
Electromagnetic Flowmeter


I. Overview
CFCIC-LDG type electromagnetic flowmeter is manufactured according to the principle of Faraday's electromagnetic induction law. It has stable and reliable working performance and high accuracy. All setting parameters and measurement parameters have automatic protection function when power is cut off, and can be stored for a long time without measurement of liquid density and viscosity. Influence of changes in temperature, pressure, and conductivity: There are no moving and blocking parts in the measuring tube, no pressure loss, no clogging, and can measure conductive liquids containing fibers, solid particles and suspended matter; a wide measuring range can measure a variety of High-concentration, high-pressure acid-alkaline solution, and the measurement range can be selected at any time.
The sensor of CFCIC-LDG type electromagnetic flowmeter uses a three-state wave excitation system. The magnetic field is constant. The electrode design is domestically leading. Under high voltage conditions, it can be self-sealed. A variety of electrode materials can be selected. Alloy electrode, can be selected according to customer needs. The converter of the LDG electromagnetic flowmeter uses the latest electronic devices in the world. The small signal processing uses a low-noise, high-impedance amplifier circuit. The input impedance reaches 1000. At the same time, large-scale integrated circuits and microprocessors and software are used. Advanced and highly intelligent. The output is 4-20mA signal standard current signal, and can communicate with computer and PLC automatic control system through RS485.

Model: CFCIC-LDG
Executive standard: JB / T9248-1999
Dielectric conductivity:> 5us / cm
Scope of application: DN6 ~ DN1500mm
Measurement range: 0.3 ~ 10m / s
Flow measurement range ratio: 1: 10/1: 20
Measurement accuracy: 0.5% 1.0%
Repeatability: 0.1% of measured value
output signal:
1. Current 4 ~ 20mA
Load 10 ~ 750Ω
2. Frequency 0 ~ 2kHz
24V active or passive
3. Pulse equivalent
4. RS485 / 232 / HART protocol (optional)
Medium temperature: 0 ~ 70 ℃; 0 ~ 120 ℃;
0 ~ 150 ℃ (optional)
Pressure: 1.0MPa; 1.6MPa; 2.5MPa;
6.4MPa; 16MPa; 25MPa; 35MPa
Use environment:
Ambient temperature: -20 ℃ ~ + 50 ℃;
Relative temperature: 5% -90%
Air pipe automatic alarm: Protection level: IP68 (submersible),
IP67 or IP65 (standard type)
Power supply: 85 ~ 265VAC or 18 ~ 36VDC
Rated power: less than 15W
Ultrasonic flow meter Ultrasonic liquid (level) level (difference) meter Radar liquid (level) level meter Electromagnetic flowmeter Turbine flowmeter Vortex flowmeter Open channel flowmeter Doppler ultrasonic flowmeter PH meter / ORP controller
Float ball level switch flow switch temperature switch pressure transmitter secondary display controller
Copyright (c) 2007-2012 scsloa.com All Rights Reserved Web Design: A-DU design
ICP record: Liao ICP No. 05007288